Could not connect to database
Submit your own tutorial
| Smart XX Rebuild PCB Installation | | By Vincent Fletcher / Smart XX |
Compliments to Team SmartXX for these images!
Note: images are of the Underside of the Xbox Motherboard.
For the LPC rebuild use the included PCB.
The yellow arrows are showing you the solderpoints on the board.
x-mods.co.nz recommend first applying solder to these points before putting
the board down.
If you add just a little bit, so the point is 'tinned' then it makes soldering
the PCB to it Much Easier!
Tin the points indicated by the yellow arrows.
Then solder in the PCB making sure that all tinned points are soldered to the
points on the PCB.
Be careful not to get too much solder on the area, and try to keep the PCB as
close in to the motherboard as possible.
Remeber, this still needs to fit back into the case so you dont want anything
sticking out from the bottom!
| | [< Back ] |
|
